Back to Wing Tips
I wound up destroying the master form getting it out of the mold.
In fact I also had to patch up the mode some with spot buddy.
It is hard to believe that epoxy can stick like that to something with 3 coats of paste wax plus 3 coats of seperating agent.
I'm preparing the mold to lay the part up, and this time I've found plain old paste wax from Johnsons.
I had used Mothers Carnauba CleanerWax on the master form.
Another issue I had this time was that the epoxy harderner had formed little crystals in it.
It didn't seam to effect it.
Back to Wing Tips
Back to Wings
Back to Dan's Project